Automatic flush mount electrical enclosure roll forming machine for making wall mounted switchboard enclosures, fetwork box, cirduit breaker enclosures, network enclosure.
Flush mount electrical enclosure machine making dimension.
Push bottom box length is adjustable from 200-600mm, the width is 190mm, and the depth is 80mm. The actual cross-section of the product provided by the customer.
1, Flush mount net work enclosure production line technical parameters
|1||MATERIAL||Type||Cold-rolled strip steel, galvanized sheet|
|Yield Strength (Mpa)||Q235|
|2||Forming product Width||Customized|
|3||Forming speed (m/min)||4-8m||Including hole|
|4||Forming main power (KW)||7.5 KW||FYR|
|5||Hydraulic power (KW)||18.5 KW||FYR|
|6||Bending power (KW)||3 KW||FYR|
Flush mount wall enclosure production line process
Uncoiler →Straightening→servo feeder→Hydraulic press breach device → Guide device → roll forming machine → hydraulic punch →shear device (including knife)→ finished product rack
Steel flush mount enclosure roll Forming machine list
This production line is equipment for production flush wall mount enclosure. The strip coil to be processed is manually placed on the uncoiler, and then corrected and tensioned. After leveling, it enters the hydraulic pre-punching and punching notch, and is sent to the forming machine by the guide device to form. Under the frictional damping action of the forming roller and pressure roller, after entering the shearing section at a linear speed of 0-10m, the product is cut off as required, and then manually packed away.
The main technical parameters
1.Details of accessory brand
Programmable controller (PLC)
Low-voltage circuit breaker
Hydraulic Solenoid Valve
Shun Xin, Taiwan
a. Applicable materials: cold rolled coil, galvanized coil
b. Material quality: Domestic GB standard
c. Tensile strength: δb≤780Mpa (Max.)
d. Yield strength: δs≤510Mpa (Max.)
e. Material thickness: 0.5-0.7mm
f. Material width: 400mm (Max.)
g. Inner diameter of steel coil: Φ360mm-Φ510mm
h. Outside diameter of steel coil: Φ1250 （Max.）
i. Steel coil weight: 3 t (Max.)
a. Number of forming staion: 16 sets of roller
b. Spindle specification: Ø48mm Ggr15 quenching and tempering
c. Roller material: Gr12 mold steel heat treatment
d. Integral archway: precision machined from 28mm steel plate, the hole distance error is less than 0.1mm
e. Base plate thickness: 20mm
4, forming ability
a. Outside diameter of coil: Φ1250mm (Max.)
b. Material forming thickness: 0.5-0.7mm
c. Product width 190
5.Speed parameters of forming unit
a. Linear speed, 0-10m / min
b. Acceleration time ＜ 30 seconds
6, Forming accuracy
a. Shear length tolerance: ≤ ± 0.5mm / m
b. Width tolerance: ≤ ± 0.5mm
c. Sickle curve: ≤2mm / m
d. Burr: ≤0.1mm (new blade cutting ordinary carbon steel plate with reasonable clearance)
e. Height tolerance: ≤ ± 0.5mm
The above tolerances are based on the first-grade steel coils with flat and edgeless waves.
7.Other equipment parameters
a. Power supply: 380V / 50HZ / 3PH (Or Custmized)
b. Installed capacity: about 25Kw
c. Forming speed: 0-10m / min
d. Cutting method: forming then cutting
e. Driving motor:
Straightener machine motor 2.2KW
Hydraulic punching and cutting 15kw,
Forming host motor 5.5KW
Servo motor 2KW
f. Floor area (approximately): length 24m × width 3m
(Roll Forming 7mX1.7m)
g. Production line direction: from left to right
(facing the unit from the operation table).
h. Equipment color: (Customer choice)
i. Unit equipment design can meet 12 hours of continuous production
j. Operating environment:
1: power supply voltage: 380V ± 10% / three-phase four-wire, frequency: 50HZ total power: about 25KW
2: Ambient temperature: 0-40 ° C, relative humidity: 60-95% RH.
V. Equipment structure and system configuration:
Overview: The production line is mainly composed of Uncoiler, Straightener, Hydraulic punching machine, forming machine, hydraulic cutting , hydraulic system, electrical control part and safety protection part.
1. Unloading (uncoiler): used for unwinding material and providing sheet material to the forming part, 3 tons of electric unwinding.
2. Leveling (straightener): 9-roller precision leveling (up 4 down 5), 2.2KW electric feeding, used to straighten the coil and eliminate material stress.
2kw Mitsubishi motor
Servo Hydraulic machine
Hydraulic cutting and Bending
2. Forming mainframe: The mainframe base of this production line is welded with 100 * 100 * 4MM square tubes, the frame is integrated with a fixed archway, the side plates are made of 25mm steel plates, and the supporting parts are made of high-quality Taiwan bearings. Twisting up and down adjustment, the host has good rigidity and stable structure.
B: Roller (roller staiton): 16 sets of roller forming, high-quality Gr12 mold steel, HRC up to 58 ~ 60º are processed by precision CNC machine tools, precision is 6 ~ 7, surface roughness is above 0.8, no scratches on the surface.
Roller material using good quality GCr15 and quench process, hardness reach 62 ℃
Guarantee of Quality
Superda guarantee flush mounting enclosure & modular iron box roll forming line design accordance with clients required drawing, machine is brand new. Specification and performance as stipulated in drawing and operation with good smooth.
Automatic wall mount switch box roll forming machine advantage
1, High efficiency production line, one minute can producing 2-3pcs
2, PLC control system, automatically and easy handle.
3, Gcr15 roller with quench process, hardness reach HRC60-65 ℃.
4,Tracking cutting system with Cr12 Cutting blade.
Model and Meaning
Flush mount electrical enclosure forming machine technology advantage.
Box roll forming machine accuracy
a. Shear length tolerance: ≤±0.3mm/m
b. Width tolerance: ≤± 0.3mm
c. Bending: ≤2mm/m
d. Burr: ≤0.1mm (new cutting edge cuts carbon steel plate in reasonable clearance)
e. Height tolerance: ≤±0.3mm
bove tolerance with flat edgeless one-stage steel coil As a prerequisite.
Surface quality: The surface of the finished product after processing does not add any processing defects.
Electrical box roll forming machine for production different type metal enclosure, such as distribution box, flush mount network enclosure, multimedia signal box.
Wall mount circuit breaker enclosure production line parameters of the forming equipment.
a. Power supply: 380V/50HZ/3PH, can customized as per user country.
b. Installed capacity: about 31kw.
c.Forming speed: 0-13m/mind.
d.Shearing method: Servo front shear
e. Drive motor: Unwinder motor 4KW.
leveling motor 2.2KW.
hydraulic punching cutting and hydraulic tensioning motor (two sets) 11KW+7.5KW. forming main engine 5.5KW.
servo motor 2KW
f. Floor area (approx.): length 24m × width 3m (host specification 7mX1.7m)
g Production line direction: from left to right (on the console facing the unit).
h. Equipment color: (customer selection)
i. Superda steel box equipment design can meet 12 hours of continuous production
j. Operating environment
1: Power supply voltage: 380V ± 10% / three-phase four-wire,frequency: 50HZ Total power: about 31KW2: Environment Temperature: 0-40 ° C, relative humidity: 60-95% RH.