• Camber ridge cap roof tile roll forming machine

  • Camber ridge cap roof tile roll forming machine

  • Camber ridge cap roof tile roll forming machine

  • Camber ridge cap roof tile roll forming machine

Camber ridge cap roof tile roll forming machine

Camber ridge tile forming machine for producing roof ridge caps. The equipment for producing ridge roof tile machinery name as ridge roof tile roll forming machine & camber tile sheet machine & galvanized steel ridge cap tile machine.

Product Description

Camber ridge cap tile roll forming machine


Roll forming machine for production ridge cap tile & building material.


Ⅰ,Metal Forming machine technology detail

 

1,Technical parameters 


No.ITEMPARAMETERREMARK
1MATERIALTypeCold-rolled strip steel, galvanized sheet
T.(mm)0.4-0.8mm
Yield Strength (Mpa)Q235
2Forming product   Width310-914.5mm
3Forming speed   (m/min)8-18mIncluding hole
4  (KW)11 KWFYR
5Hydraulic power   (KW)4 KWFYR
6Collect Rack6mFYR
7Voltage AC380V,50Hz,3PCustomized


Ⅱ, Camber ridge cap roof tile production line process

Uncoiler →Guide device → roll forming machine →shear device (including knife)→ finished product rack


Roof tile machine layout as below


Floor Deck Machine

Ⅲ,Ridge cap tile drawing 

Camber ridge cap roof tile roll forming machine



Ⅲ, Roll Forming machine list


(Ⅰ), Uncoiler  

1,Type Manual Expansion

2,Parameter

1) Passive   discharge

2) Coil weight:<   5T

3) Coil inner D.:φ450mm-φ530mm

4) Max. Width.1300mm

5) Thickness .0.4-1.6mm



(Ⅱ),Guide device


(Ⅲ), Main Forming machines  

3.1  Forming Roller:16stations,and add Rub-roll, To make sure the surface profile no scratches.

3.2  Side Panel:T.18mm ,A3 steel   Heavy duty 。

3.3  Rolling speeding: 8-18 m/min。

3.4  Roller material:#45,overall quenching, hardness HRC56-62 ℃. 
3.5  Motor power:7.5KW。    
3.6  Main Roller :¢75mm,45 #。
3.7  Equipment base: 45 # H type using welded steel plate.
3.8  Transmission: chain drive.
3.9 Security: across the board with emergency stop buttons, easy to handle emergencies, to ensure that equipment and operator safety. And other gear in the chain and the staff could easily lead to injury transmission section covered with protective cover, to ensure the safety of workers.


Camber ridge cap roof tile roll forming machine


(Ⅳ) Hydraulic shear for cutting metal steel products.

 

(Ⅴ)Collect Rack 


Ridge tile using in construction


Camber ridge cap roof tile roll forming machine


(Ⅵ),Electrical control system

The entire line imported PLC control, LCD touch screen, man-machine interface. People interact with the PLC. Operator setting the program to run automatically (programmable control) and control process monitoring, production line operator control and modify the control parameters, and real-time monitoring the equipment status & parameters and fault indication. Workpiece length digital setting, adjustable length can be adjustable as well. Real-time monitoring of equipment operating status and fault indication.
Operation manual / automatic two styles. With manual and automatic switching function: In the manual mode, can be stand-alone operation, easy maintenance; In automatic mode, carry out full production run, in order to start; across the board with emergency stop buttons, easy to handle emergencies, to ensure that equipment and operating personnel Safety.

(Ⅶ)

Machinery main components of the brand

PLC control system: Siemens
Inverter: Taiwan Shilin
Encoder: Omron
Touch screen: Siemens
Some components are Schneider brand devices.


(Ⅷ),Devices completed ridge cap roof tile prodution line


No.Machine nameQTYREMARK
1Uncoiler   straightener1
2Guide device1
3Forming machine1
4Follow Shear1Including knife
5Collect rack1
6Control system1


Ⅵ, Cap roof tile machine accessories brand

No.Namemanufacturer
1Motor & ReducerDomestic brands
2The main key bearingDomestic brands
3InverterShilin
4PLC SystemsSiemens
5Low-voltage electricalSchneider
6EncoderOmron
7touch screenSiemens
8Hydraulic systemDomestic brands


 

Product Features

Guarantee of Quality

Superda guarantee floor deck roll forming line design accordance with clients required drawing, machine is brand new. Specification and performance as stipulated in drawing and operation with good smooth.


Camber ridge cap roof tile roll forming machine

Terms of Payment

By TT, 30%  in advance, 70% before delivery.

 

Time of Shipment

60 days after received deposit

 



Model and Meaning

Model: YX-70-150-200

Camber ridge tile roll forming machine for mass production construstion material roof using.

The ridge tile, which is popular on the ridge, can be understood as the same part of the tile that can drain to both sides. It is accurate to say that the ridge tile covers the ridge and overlaps with the tile on the sloping roof on both sides of the ridge. Grooved tile. Usually made into a herringbone, saddle, or arc。

The equipment for producing ridge roof tile machinery name as ridge roof tile roll forming machine & camber tile sheet machine & galvanized steel ridge cap tile machine.

Technical Parameters

Ridge tile roll forming machine parameter

No.ItemSpecification
1MaterialGI,PPGI,AI
2Equipment operationAutomatic
3Voltage380V 60Hz 3Phase & customized
4Ridge tile size70*150*200mm
5Material width(mm)Depend on design
6Thickness material0.4-0.8mm
7Machine size3800x1100x1300mm
8Speed10-18m/min
9Diameter of shaft45mm
10Weight of the Machine3500KGS
11Material of rollers#45
12Motor brandSiemens 
13PLCSiemens
14Forming power 11kw
15Hydraulic power4kw



CONTACT US

Tel: +86 755 2824 6186

Mob: +86 188 1435 5377

Fax: +86 755 2883 9980

E-mail: sales@superdamachine.com

Skype: live:demiwu2014

WhatsApp: +86 188 1435 5377

FOLLOW US

Copyright © Shenzhen Superda Machine Co., Ltd. All Rights Reserved | Sitemap